A-A-2072
December 10, 1982
COMMERCIAL ITEM DESCRIPTION
LAMP, INCANDESCENT
(SEALED BEAM, TRADE NO. 4863)
The General services Administration has authorized the use of this commercial item description in preference to Federal Specification W-L 50.
This description covers a sealed beam two filament military automobile incandescent lamp..
Salient characteristics:
PAR 56, 178mm (7 inch) diameter bulb
Design volts – 28 for each beam
Watts – 80 watts for higher beam, 60 watts for lower beam
Base – waterproof terminals
Filament designation – CC 6 for each filament
Maximum overall length = 5 inches (127 mm)
Rated average life – 400 hours for each beam
Lower beam filament is shielded.
Workmanship. The lamp shall not have bent contacts, slight or complete discoloration of the lens or reflective coating, small bubbles in the glass, cracked glass, peeled reflective coatings, and open or shorted filaments.
Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable.
Preservation, packaging, packing, labeling, and marking. The preservation, packaging, packing, labeling, and marking shall be as specified in the contract or order.
Federal Specification W-L-101 is available from General Services Administration, Specification Section (WFSIS), 7th & D. Streets, SW, Washington, DC 20407.
Note. NSN is 6240-00-686-4168
MILITARY INTERESTS:
DoD has determined that no military activity
has an official interest in this commercial
item description.
CIVIL AGENCY COORDINATING ACTIVITY:
GSA –OPP
PREPARING ACTIVITY:
GSA – OPP
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business