A-A-2221
June 29, 1984
COMMERCIAL ITEM DESCRIPTION
LAMP, INCANDESCENT (TRADE NO. 25T8DC)
The General Services Administration has authorized the use of
this commercial item description.
Salient characteristics.
Bulb - T8, 1 inch (25.4mm) diameter
Base - Double contact bayonet
Volts - 120
Filament design - C-7A
Maximum overall length – 2-5/8 inches
Average laboratory life – 200 hours for appliance service
Approximate initial lumens - 195
The lamps shall be in accordance with ANSI C78.100.
The issues of ANSI Standard C78.100 in effect on the date of solicitation shall be used to determine compliance with these requirements.
Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practical.
Preservation, packaging, packing, labeling, and marking. The preservation, packaging, packing, labeling, and marking shall be as specified in the contract or order.
Preproduction inspection. One package of lamps, produced using the same tooling, production, and assembly methods that are used for production lots, shall be submitted for examination and test in accordance with the above requirements. Documentation consisting of the certification and test data shall be presented for examination during performance of the preproduction inspection. Failure of the preproduction samples to pass the examination of one or more of the tests, the lack of required documentation, or failure of the documentation to substantiate conformance to the requirements of this CID shall be cause for rejection.
Notes.
The National Stock Number (NSN) for this lamp is 6240-00-770-7647.
ANSI Standard C78.100 is available from the American National Standards Institute, Inc., 1430 Broadway, New York, New York, 10018.
The commercial item certification clause is not required when this commercial item description is used.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business