MIL-DTL-6363/1C
NOTES:
1.
Dimensions are in inches. Unless otherwise specified, tolerances:
decimals ±0.010 inch, angles ±0.5°.
2.
Intended use - aircraft navigational light assemblies conforming to
MIL-L-21652 (MS21972 and MS25277) and similar.
3.
For design feature purposes, this specification takes precedence over procurement
documents referenced herein.
REQUIREMENTS:
1.
Configuration and dimensions: See figure 1.
2.
Finish: Glass globe shall be clear except where reflector surface is required.
3.
Lamp operating characteristics: When operating at rated voltage (DC), the lamp operating
characteristics shall be as specified in table I.
TABLE I. Part numbers and operating characteristics.
Type
Temp Rating
Shock
Average
Military
Per
Continuous
Test
Electrical Ratings
Rated Lab
Part
MIL-DTL-
Operation 1/
Level
Volts Amperes Watts
Life at DC
°C
°F
Number
6363
(G's)
(Nom) (Max)
(Max)
Hours
M6363/1-1
II
113
235
90
28.0
1.55
M6363/1-2
II
139
275
90
28.0
1.55
43
150
M6363/1-3
II
113
235
135
6.2
6.93
1/
For 70 percent of average rated lab life.
4.
Light distribution:
Beam candlepower, 4,800 candelas on reflector axis.
Horizontal and vertical beam spread to 480 candela points, 20° minimum.
5.
Coating adhesion: Applicable.
6.
High temperature: See table I for applicable high temperature rating.
7.
Thermal shock: See table I for applicable high temperature rating.
2