MIL-DTL-6363/2C
NOTES:
1.
Dimensions are in inches. Unless otherwise specified, tolerances:
decimals ±0.010 inch, angles ±0.5°.
2.
Intended use - aircraft navigational light assemblies.
3.
For design feature purposes, this specification takes precedence over procurement
documents referenced herein.
REQUIREMENTS:
1.
Configuration and dimensions: See figure 1.
2.
Finish: Glass globe shall be clear except where reflector surface is required.
3.
Lamp operating characteristics: When operating at rated voltage (DC), the lamp operating
characteristics shall be as specified in table I.
TABLE I. Part numbers and operating characteristics.
Type
Temp Rating
Shock
Average
Military
Per
Continuous
Test
Electrical Ratings
Rated Lab
Part
MIL-DTL-
Operation 1/
Level
Volts Amperes Watts
Life at DC
°C
°F
Number
6363
(G's)
(Nom) (Max)
(Max)
Hours
M6363/2-1
II
140
285
135
6.2
4.56
28
300
M6363/2-2
II
140
285
90
28.0
1.00
28
300
1/
For 70 percent of average rated lab life.
4.
Light distribution: See tables II and III.
TABLE II. Light distribution (horizontal plane).
LIGHT DISTRIBUTION IN HORIZONTAL PLANE CONTAINING FLIGHT AXIS (0°)
AND PASSING THROUGH LIGHT CENTER AND CENTER OF INDEXING PINS
Military Part Number
Beam Candlepower
Angle of Distribution
Candelas (Minimum)
2° inboard to 15° outboard
M6363/2-1
200
15° outboard to 100° outboard
25
2° inboard to 15° outboard
M6363/2-2
200
15° outboard to 100° outboard
25
2