MIL-DTL-6363/5A
10.
Random vibration: Applicable for qualification tests only. See figure 3 for random
vibration curves. For vibration tests, the lamps shall be potted in a clear epoxy block
which shall be rigidly mounted to the vibration table.
11.
Shock: Applicable for qualification tests only. See table I for applicable "g" level. For
shock tests, the lamps shall be potted in a clear epoxy block which shall be rigidly
mounted to the shock machine.
12.
Humidity: Applicable. for qualification tests only.
13.
Salt spray: Applicable for qualification tests only.
14.
Marking: Lamps do not require marking. Unit packages and containers shall be marked
as specified in section 5 of MIL-DTL-6363.
Production lamps qualified to MIL-DTL-6363 and listed on QPL-6363 shall be identified on
packages and containers in accordance with ANSI-C78.390 and as supplemented herein.
ANSI-C78.390 authorized suffix letters shall be supplemented with the letter "Q" (MIL-DTL-
6363 QPL item). The letter "Q" shall be incorporated into the method of designation in
accordance with the following example:
EXAMPLE
XXX
XXXX
Q
AS15
|
|
|
|
Manufacturers__|
|
|
|___Added after aging
Identification
|
|
and selection for
|
|
15 percent tolerance
Industry____________________|
|
on MSCD
(ANSI)
|
Lamp number
|___Qualified to MIL-DTL-6363
15.
Interchangeability: These lamps may be similar to, but are not interchangeable with, other
commercial or military lamps due to unique aircraft applications and qualification.
There are no technical changes in this revision.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business