MIL-DTL-6363/8A
NOTES:
1.
Dimensions are in inches.
2.
Intended use - aircraft indicator, instrument, and panel light assemblies.
3.
For design feature purposes, this specification takes precedence over procurement
documents referenced herein.
4.
Qualification by similarity - Lamp M6363/8-7AS15 (or optional M6363/8-5 AS15) is
required to be fully qualified in accordance with table I of MIL-DTL-6363. Lamp
M6363/8-2 AS10 is required to be qualified in accordance with table II of
MIL-DTL-6363. All other basic lamps (MSCD ±25 percent) and "AS" designated lamps
may be granted qualification by similarity and extension of qualification from the qualified
lamps with no additional testing. Red lamp M6363/8-7R (or optional -5R) is required to
be qualified in accordance with table II of MIL-DTL-6363. All other colored lamps may
be granted qualification from -7R (or optional -5R) with no additional testing. Refer to
MIL-DTD-6363 for conditions and data requirements for qualification.
REQUIREMENTS:
1.
Configuration and dimensions: See figure 1.
2.
Construction:
a.
Standard lamp construction shall include a side weld or solder bead and solder bead
bottom contact.
b. Where required for greater reliability and added resistance to corrosion and internal
shorting, solderless construction is available as an option by the addition of a dash and
suffix letter "S" to the part identification number in table I.
EXAMPLE: M6363/8-1-S
When so specified, solderless construction shall include a side weld and nickel plated brass
bottom contact.
c.
Insulators shall be color coded as follows to identify voltage rating of lamps:
5.0v - Green
6.0v - Green
6.3v - Green
14.0v - Yellow
28.0v - Red
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business