INCH-POUND MS25236G
3 May 2004
SUPERSEDING MS25236F
12 January 1967
DETAIL SPECIFICATION SHEET LAMPS, INCANDESCENT T-1- 1/4, KNURLED SCREW BASE
Inactive for new design after 30 November 1998
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the products described herein shall consist of this specification sheet and MIL-DTL-6363.
0 .250
NO PORTION OF THE ENVELOPE SHALL BE MORE THAN .007 FROM THE AXIS
OF THE LAMP
.420 MAX
INSULATING SPACER
CONTACTS
THREAD 5/16-32 UNEF-2A
.166 .125
THREAD RELIEF .031 WIDE TO ROOT OF THREAD
.125
BREAK EDGE .025
STRAIGHT FINE KNURL EITHER ON SIDE OR ON BEVEL EDGE OR IN BOTH LOCATIONS
0 .375
DURABLE DULL BLACK FINISH ANY EXPOSED CONDUCTING PART OF THE BASE MAY BE CONNECTED TO THE THREAD CONTACT, BUT SHALL NOT BE CONNECTED TO THE SHOULDER CONTACT.
STAMP OR ENGRAVE TRADE NUMBER AND MANUFACTURER'S TRADE MARK OR ABBREVIATION OF MANUFACTURER'S NAME ON UNKNURLED PART OF LAMP BASE.
AMSC N/A FSC 6240
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business