MIL-DTL-6363/13A
NOTES:
1.
Dimensions are in inches.
2.
Intended use - aircraft indicator and interior lighting applications.
3.
For design feature purposes this specification takes precedence over procurement
documents referenced herein.
4.
Qualification by similarity - Lamp M6363/13-2 is required to be fully qualified in
accordance with table I of MIL-DTL-6363. M6363/13-1 may be granted qualification by
similarity and extension of qualification from M6363/13-2 with no additional testing.
M6363/13-1R may be granted qualification by similarity and extension of qualification
from M6363/12-4R with no additional testing. Refer to MIL-DTL-6363 for conditions
and data requirements for qualification.
REQUIREMENTS:
1.
Configuration and dimensions: See figure 1
2.
Finish: Glass globe finish shall be as indicated in table I. Red lamps shall conform to
MIL-C-25050 for instrument and panel lighting red.
TABLE I. Part or identifying numbers (PIN) and operating characteristics.
Part or
Type
Bulb
Shock
Filament
MSCD
Average
±25%
Identifying
MIL-
Fin-
Test
Electrical Ratings
Style
Rated Lab
Number
DTL-
ish
Level
Volts
Amperes Watts
1/
Life at DC
(±10%) (Max)
(PIN)
6363
(G's)
(Nom)
Candelas
Hours
M6363/13-1
Clear
28.0
1.29
39.7
C-2V
50
300
M6363/13-1R
I
Red
50
28.0
1.29
39.7
C-2V
2/
300
M6363/13-2 3/
Clear
28.0
1.29
39.7
C-2V
44
1,000
1/ C-2V are supported filaments.
2/ Rated candlepower for -1R applies to clear lamp before coating is applied.
3/ M6363/13-2 is used on exterior lighting applications.
3.
Lamp operating characteristics: When operating at rated voltage, the lamp operating
characteristics shall be as specified in table I.
4.
Coating adhesion: Applicable to exterior coated colored lamps.
High temperature: Applicable for qualification tests only (85°C/185F°).
5.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business