INCH-POUND
MIL-DTL-15098E
23 August 2010
SUPERSEDING
MIL-L-15098D
14 December 1973
DETAIL SPECIFICATION
LAMPS, GLOW,
GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers hermetically sealed glow lamps containing gases or
vapor in which luminosity is produced by ionization of these gases for indicating and circuit
control functions. The region of high luminosity is near the negative electrode (or cathode).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements of the documents cited in sections 3 and 4 of this specification, whether or not they are
listed.
2.2 Government documents.
2.2.1 Specifications and standards. The following specifications and standards form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of
these documents are those cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to Defense
Logistics Agency Aviation VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-5616,
or e-mailed to STDZNMGT@dla.mil. Since contact information can change, you may want to
verify the currency of this address information using the ASSIST database at
https://assist.daps.dla.mil/.
AMSC N/A
FSC 6240
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business